One of the most beautiful and expensive types of flooring is marble. Homeowners and business owners need to take great care of their marble tiles to maintain their timeless elegance and stay stain-free.

However, marble floors can be challenging to clean and polish because the material is very sensitive.

It can be easily stained (marble is a porous stone to absorbs liquids quickly and stain) or scratched if the wrong marble cleaning products or solutions are used.

At Sawgrass Cleaning, our cleaning experts have the knowledge, skills, and experience to clean marble floors effectively and efficiently for all of our residential and commercial customers.

We take time to make sure that marble surfaces are clear of dust and dirt, and we use a specially formulated marble cleaner to ensure that the natural stone continues to look new.

soft microfiber cloth, vacuum cleaner, very dilute solution

If you have marble floors in your business or home and are looking for ways to clean them properly, here are some tips for keeping your marble floors clean and shining.

The Type of Marble Floors Matters When Cleaning

Some people do not realize that there are two types of marble floors that can be installed in an office or home: natural stone and cultured.

Although both of these marble floor types are difficult to distinguish just by looking at them, they will have different reactions to your sanitizing methods or the cleaning solution you use.

Natural marble floors are much more sensitive to scratching and staining, so you must be very careful when deciding how to clean and what cleaning solution to use.

Before beginning the cleaning process, your first task is to figure out which type you have. There are a few ways to identify the type of marble flooring you have.

First, natural marble floors will be cooler than the surroundings, but cultured ones will be about the same temperature. Touch the surface and feel for the temperature.

Two other methods may damage a small bit of the marble floors, so they should be done in an inconspicuous location. You could place a few drops of vinegar or lemon juice on the surface to see if it begins to bubble or fizz.

If so, wipe it immediately with a damp cloth to prevent damage. That will tell you that it is a natural marble floor.

The other method requires you to scratch the surface with your fingernail. If you see etch marks, you will know that it is natural. Knowing the type will determine how to proceed with cleaning marble floors.

 

How to Properly Clean Marble Floors

After identifying the type of flooring you have, you can begin the actual cleaning process.

The most important thing to remember is that a natural marble floor needs to be cleaned carefully with a soft cloth or microfiber cloth, dust mop, dry mop, and marble polishing powder.

Acidic cleaners should be strictly avoided as they can permanently stain the floor.

Whether you have dark or light-colored marble, here are some great cleaning tips to keep your floors looking great for years to come:

Remove Stains with Water and Neutral Detergent

Since marble is so porous, any liquids left to sit for a short period will seep into the stone and leave a stain.

If you have fresh stains on the marble (especially organic stains), clean it with a solution of warm water and pH-neutral cleaners. Rub the stain until it is gone, rinse, and dry thoroughly.

Standing water cannot be left, so drying marble floors is critical.

Tough Stains May Require a Water and Ammonia Solution

If you have tougher stains that have been on the floor longer, you may need to use a gentle cleaning chemical solution such as ammonia and water.

It should be a dilute solution and never a full dose of harsh chemicals. Use a spray bottle to ensure that there is not too much liquid on the floor. 

You can gently rub the solution onto the floor using a stiff-bristled brush and then rinse thoroughly. Dry with soft cloths.

Always Use a Soft Cloth for Wiping

A soft towel or soft mop should be used for drying and wiping during your regular cleaning since natural marble can be scratched easily.

Cleaning spills immediately will keep the marble looking great and prevent staining, and using only soft cloths will ensure it remains unscratched.

Cultured Marble Floors Are Tough

Unlike natural marble, cultured marble is tougher and less prone to scratching or damage. When manufactured, a protective coating is applied to make it easier to clean and maintain.

You should still avoid using any abrasive cleaning pads or an acidic cleaner when removing stains, but you can be a bit more aggressive in your cleaning with cultured marble.

Enlist the Assistance of Marble Cleaning Specialists

When in doubt, call in the professionals such as ours at Sawgrass Cleaning Solutions. We have the knowledge and experience to clean marble floors properly without damaging them.

Contact Our Marble and Stone Polishing Experts

If you are a business owner looking for a skilled company to provide routine cleaning of your marble floor, contact Sawgrass Cleaning Solutions.

Our team is here to help you ensure that your flooring stays clean and well-polished.

The team at Sawgrass Cleaning Solutions never uses harsh cleaners or metal attachments that can damage your floors. We have extensive training in all types of flooring, and we are happy to share our expertise with you.

We can also give you tips on preventing stains in the future.

Contact us today to learn more about our cleaning techniques and request a free cleaning quote from our expert technicians.